Double Braid Polyester Professional Duty Rope
CONSTRUCTION: Polyester yarn is pre-twisted for high strength and superb abrasion resistance.
TENACITY: High Tenacity Tire Cord Polyester yarns are non-rotational and torque-free. Excellent abrasion resistance. Second strongest braided rope available.
EXTRA FACT: Electrical Professionals choice for strength and dielectric properties in an easy-to-handle, flexible and spliceable rope. No strength loss when wet. Resists oil, gas and most chemicals. Is a braid on braid rope.
APPLICATIONS: Fall Arrest Lanyards, Sub Lines, Hand Lines, Stage Lines, Pulling Lines, Rigging Lines, Halyards, Conduit Line, Spring Lines, Safety Lines, Long Lines, Purse Lines, Trawl Slings, Ladder Line, Dielectric.
SAFE ROPE USAGE:
* Working Load / Working Load Limit
The Working Load Limit (WLL) is a guideline for the maximum allowable capacity of a rope product and should not be exceeded. Applied loads higher than a specified WLL can overstress and damage fibers, resulting in premature rope failure. The Working Load of an application should not exceed the WLL of the rope for optimal product performance and the safety of personnel and property.
** Minimum Breaking Strength
The Minimum Breaking Strength (MBS) is the force that a given rope is required to meet or exceed in a laboratory test when it is new and unused. MBS values are given in Cordage Institute Standards and individual manufacturers' specifications
There are inherent risks in the use of rope and cordage because such products are subject to higher variable conditions that change over time. Therefore Design Factor ( the ratio between the MBS and WL ) selections and Working Load Limits must be calculated with consideration of exposure to risk and actual conditions of use for each application. If in doubt, consult the manufacturer, and experienced engineer or other qualified individual regarding the design, application and selection of a rope product.