Heat Stabilized - High Tenacity Nylon Professional Duty Rope
CONSTRUCTION: Strongest general purpose rope available. 4 Stage construction for best rope balance and abrasion resistance.
TENACITY: High tenacity Air-Bag Nylon fibers for optimum strength and UV resistance
EXTRA FACT: Construction professionals' most requested rope. Very good abrasion resistance. Resists oil, gas and most other chemicals. Excellent UV resistance.
APPLICATIONS: Fall Arrest Lanyards, Snub Lines, Tow Ropes, Tie Downs, Dock Lines, Anchor Lines, Slings, Rub Rails, Hand Lines, Gate Ropes, Jumper Lines, Guy Lines, Set Lines, Bank Line, Windlass Rope
SAFE ROPE USAGE:
* Working Load / Working Load Limit
The Working Load Limit (WLL) is a guideline for the maximum allowable capacity of a rope product and should not be exceeded. Applied loads higher than a specified WLL can overstress and damage fibers, resulting in premature rope failure. The Working Load of an application should not exceed the WLL of the rope for optimal product performance and the safety of personnel and property.
** Minimum Breaking Strength
The Minimum Breaking Strength (MBS) is the force that a given rope is required to meet or exceed in a laboratory test when it is new and unused. MBS values are given in Cordage Institute Standards and individual manufacturers' specifications
There are inherent risks in the use of rope and cordage because such products are subject to higher variable conditions that change over time. Therefore Design Factor ( the ratio between the MBS and WL ) selections and Working Load Limits must be calculated with consideration of exposure to risk and actual conditions of use for each application. If in doubt, consult the manufacturer, and experienced engineer or other qualified individual regarding the design, application and selection of a rope product.